Root Intrusion & Drain Clogs

Trees are beautiful for landscaping around your home and provide lots of shade during hot summer months, but beware! The roots from these beauties are the number one cause of sewer line damage in homes and are definitely the most expensive sewer maintenance problem as well.  These roots can cause major backups in your system, or worse case scenario, can even cause a complete collapse of your system. Learn how to prevent and maintain your pipes from this damage, or, if you’re already experiencing a problem, learn what you need to do to stop these roots from causing any further damage.

Root Intrusion & Drain Clogs
Root Intrusion & Drain Clogs

How do roots get into my pipes in the first place?

A tree’s roots are actually made up of a couple different parts; the larger more permanent roots, located closer to the base of the tree, are for support and stabilization, and the smaller, more hair-like roots which travel away from the tree, are for water and nutrient absorption.  When water travels through your pipes, its warmth radiates vapors in the piping, but if a small crack or leak is apparent, or if any of the joints are loose, these vapors radiate out into the soil surrounding the pipe.  The small hair-like roots of the tree attract toward these vapors and enter the pipes at these small cracks and leaks or loose joints looking for water and nutrients.  This is mostly apparent during hot summer or drought periods, or extremely cold winter months when there is no rain.

How do the roots affect my pipes though?

The hair-like roots will begin to grow within the pipe and form masses surrounding each point of entry.  As you continue to use your sinks & showers, debris from your drains flows through these pipes trying to make its way to the main sewer line, but like a net, the roots become a catchall for this debris and slowly begin to clog your pipes causing backups and reduced flow in your drains. If not taken care of, these roots can cause a complete blockage in your drains, or worse, the roots will expand putting lots of pressure on the crack where they entered, causing the pipe to break and a complete collapse of your pipes to occur.

 What do I do if I’ve already noticed my drains begin to slow?

Since the problem is underground and out of sight, it is usually kept out of mind until it’s too late.  Slowing of your drains and gurgling from your toilets though, are the two biggest indicators of root intrusion in your pipes.  Your best bet is to call a local plumber as soon as possible, like Daniel Cordova Plumbing, Drain & Sewer, to come check out the problem.  Often a sewer camera inspection can help determine the extent of the damage; If the damage is minor, a plumber can remove the roots by using a root saw or a high pressure flushing system, but if the damage is severe, where the pipes are structurally damaged, they might require complete replacement.

How can I prevent roots from entering my pipes?

The best way to prevent root intrusion is first, to make sure that when you plant or re-plant trees and other shrubs around your home, that you find out where your sewer lateral pipe is located, the pipe that connects your home plumbing system to the main sewer line, beforehand, and make sure to plant at least ten (10) feet away from it.  Second, is to schedule a regular cleaning of your sewer lateral pipe.  Once roots have already entered your pipes though, and once you have had them cut or cleaned out, it is important to keep up with this maintenance because when cut from the inside of the pipe, the root is still located at the same entry point and will continue to grow eventually causing a major break of the pipe.

Since the sewer line is located in city property though, wouldn’t they have to take care of it?

Keep in mind that although the sewer line is generally located in the street, which IS city property, homeowners are still responsible for maintaining their sewer lateral pipe that connects their home plumbing to the sewer line.

Summing everything up, what is the overall story about root intrusion in my pipes?

Overall, roots can cause a lot of damage to your home plumbing system, and if not taken care of correctly, will eventually end up causing a complete collapse of your system.  So make sure to get your drains inspected and cleaned regularly (we recommend scheduling an appointment at least once a year) and make sure to take care of any problems as soon as they occur.  Waiting to fix these problems will only cause you bigger and way more extensive and expensive problems in the future.

Hard Water Headaches

HARD WATER HEADACHES: SOLUTIONS FOR THE TOUGHEST GRIME

Hard water stains

We’ve all seen it.  That white grime that sticks to our shower walls, bath & kitchen sinks, and all of our faucets and fixtures near water.  We clean and scrub until our knuckles are white and our backs are aching, but to no avail. What causes this headache and how can it be fixed? Well, the culprit is hard water, and although this filthy residue CAN be cleaned, unfortunately, there’s not quite an “easy fix” to the problem.  There are however many solutions that you can try which will work, and which we have listed here, but first, let’s start from the top.

What is hard water exactly?  Hard water is water that has an extremely high mineral content of calcium and magnesium.  When water is left sitting on a surface, like water drops on your shower door after you have just taken a shower or on your sink faucet after you wash your hands, the calcium and magnesium in the water harden to form a rock-hard film or debris that looks a lot like soap scum.  It often makes these surfaces look grimy and filthy no matter how often or how hard you clean them, and although hard water generally is not harmful to one’s health, it can often pose serious problems to the plumbing in your home and to certain household appliances as well.  A few unseen problems, such as slow-building drain clogs & low-water pressure in showers and faucets, are just a few of the many problems, aside from that filthy-looking residue, that hard water causes.

As mentioned before, and if you’ve already tried, you know that hard water is not the easiest to clean, and the longer the buildup remains, the more hard water buildup piles on, and the harder it is to clean.  So, before you call a professional and spend a lot of money, why not try a few of these solutions yourself:

Cleaning hard water deposits on shower doors, tile, faucets, countertops, etc

  • Industrial cleaners- which are made from certain chemicals can be used to break apart the scaly deposits and make it easier to wash them away.
  • High-pressure steamers- the high-pressure steam causes the residue to loosen and then fall off these surfaces.
  • High-pressure washers– the high-pressure washers harshly break apart the residue and wash it away; however, extreme caution needs to be taken with this method, as the high pressure of the water can often tear apart the surface causing even further damage and sometimes necessary replacement.
  • Muriatic acid- can be diluted and sprayed on to hard water crust to wash it away, but make sure that it is being used in a well-ventilated area, and is stored away from chlorine, as it will become explosive.
  • White vinegar- sprayed on or poured on to the surface, the vinegar begins to break apart these deposits.  Letting it set for a minimum of ten minutes, and taking a toothbrush to the surface after it has finished setting will greatly help the process, and then just wash it away.

Cleaning hard water deposits in fixtures and appliances

  • Low water pressure in shower and sink faucets– often caused by hard water buildup inside of the faucet, it can easily be cleaned by submerging the faucet in vinegar for 6-8 hours.  Taking apart a fixture isn’t always the easiest thing to do, so to make things easier, try filling a small sandwich-sized baggie with vinegar and putting the baggie over the faucet so the facet is completely submerged in the vinegar.  Tie the baggie into place by using a rubber band and leave it to set overnight or for at least 6-8 hours.  This will break down the mineral build-up and clear the holes that caused the pressure to backup.
  • Coffee makers, teapots, and other pots and pans- pour white vinegar directly into your coffee maker and run as usual.  It might take more than one cycle to get the water spots to come clean, but after a few runs, it should be looking pretty clean and clear.  Calcium deposits in teapots and kettles can also be removed by bringing 2 cups of vinegar to boil, let set for 10 minutes, and then wash well.  Same with other pots and pans.
  • Dishwashers and washing machines- Pour 2 cups of vinegar directly into your dishwasher and run through a short cycle to clean the interior and hoses of the washer, or pour 2 cups of vinegar down the bleach dispenser of your washing machine and run a small cycle to clean the interior and hoses of that washer.

If hard water still remains a problem, give us a call at (855) 327-0885 or contact us online.  These parts might need to be replaced to prevent any further problems deeper within these systems.  General maintenance of hard water spots and residue is key, whether it is weekly, bi-weekly, or even monthly.  Hard water shouldn’t be a headache, so keep on top of it by using these solutions to help you relieve this headache once and for all!